Other sites you may find interesting:
www.somewhere-to-go.co.uk
www.drivingschoolsbristol.com
www.alan.drivinglessonsbristol.com
www.alan.drivingschoolsbristol.com

Under the bonnet of the 2009 Peugeot 207 Verve.
Oil and Brake fluid yellow cap, Washer-blue cap, Coolant-black cap

VEHICLE SAFETY CHECK QUESTIONS Cat B From 1st July 08

1. Open the bonnet, identify where you would check the engine oil level and tell me how you would check that the engine has sufficient oil.
A = Identify dipstick / oil level indicator, describe check of oil level against the minimum/maximum markers.

2. Open the bonnet, identify where you would check the engine coolant level and tell me how you would check that the engine has the correct level.
A = Identify high/low level markings on header tank where fitted or radiator filler cap, and describe how to top up to correct level when the engine is cold.

3. Open the bonnet, identify where the brake fluid reservoir is and tell me how you would check that you have a safe level of hydraulic brake fluid.
A = Identify reservoir, check level against high/low markings.

4. Identify where the windscreen washer reservoir is and tell me how you would check the windscreen washer level
A = Open the bonnet and Identify reservoir and explain how to check level.

5. Tell me where you would find the information for the recommended tyre pressures for this car and how tyre pressures should be checked.
A = Manufacturer’s guide, use a reliable pressure gauge, check and adjust pressures when tyres are cold, don’t forget spare tyre, remember to refit valve caps.

6. Tell me how you would check the tyres to ensure that they have sufficient tread depth and that their general condition is safe to use on the road.
A = Check that there are no cuts and bulges and there is at least 1.6 mm of tread depth across the central ¾ of the breadth of the tyre and around the entire circumference.

7. Tell me how you would check that the brakes are working before starting a journey.
A = Brakes should not feel spongy or slack. Brakes should be tested as you set off. Vehicle should not pull to one side.

8. Tell me how you would check that the headlights and tail lights are working. (No need to exit vehicle.)
A = Operate light switch (turn on ignition if necessary), As this is now a "Tell Me" question, there is no need to physically check the lights.

9. Tell me how you would make sure your head restraint is correctly adjusted so it provides the best protection in the event of a crash.
A = The head restraint should be adjusted so the rigid part of the head restraint is at least as high as the eye or top of the ears, and as close to the back of the head as is comfortable. On some cars head restraints might not be adjustable

10. Tell me how you would know if there was a problem with your anti lock braking system.
A = Warning light 0n the dashboard should illuminate if there is a fault with the anti lock braking system

Continued on page 2

Under the bonnet of the 2003 Fiesta 1.4 TDi